Spring Context 与Spring MVC Context

位置:首页>文章>详情   分类: 教程分享 > Java教程   阅读(2610)   2023-03-28 11:29:14

引言

Spring Context与Spring MVC容器常见的问题和疑问讲解。

一.Spring MVC WEB配置

Spring Framework本身没有Web功能,Spring MVC使用WebApplicationContext类扩展ApplicationContext,使得拥有web功能。那么,Spring MVC是如何在web环境中创建IoC容器呢?web环境中的IoC容器的结构又是什么结构呢?web环境中,Spring IoC容器是怎么启动呢?

  以Tomcat为例,在Web容器中使用Spirng MVC,必须进行四项的配置:

  • 修改web.xml,添加servlet定义;

  • 编写servletname-servlet.xml(servletname是在web.xm中配置DispactherServlet时使servlet-name的值)配置;

  • contextConfigLocation初始化参数、配置ContextLoaderListerner; 

Web.xml配置如下:
 

<!-- servlet定义:前端处理器,接受的HTTP请求和转发请求的类 -->
    <servlet>
        <servlet-name>court</servlet-name>
        <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
        <init-param>
            <!-- court-servlet.xml:定义WebAppliactionContext上下文中的bean -->
            <param-name>contextConfigLocation</param-name>
            <param-value>classpath*:court-servlet.xml</param-value>
        </init-param>
        <load-on-startup>0</load-on-startup>
    </servlet>
 
    <servlet-mapping>
        <servlet-name>court</servlet-name>
        <url-pattern>/</url-pattern>
    </servlet-mapping>
 
    <!-- 配置contextConfigLocation初始化参数:指定Spring IoC容器需要读取的定义了非web层的Bean(DAO/Service)的XML文件路径 -->
    <context-param>
        <param-name>contextConfigLocation</param-name>
        <param-value>/WEB-INF/court-service.xml</param-value>
    </context-param>
 
    <!-- 配置ContextLoaderListerner:Spring MVC在Web容器中的启动类,负责Spring IoC容器在Web上下文中的初始化 -->
    <listener>
        <listener-class>org.springframework.web.context.ContextLoaderListener</listener-class>
    </listener>
 

在web.xml配置文件中,有两个主要的配置:ContextLoaderListener和DispatcherServlet。同样的关于spring配置文件的相关配置也有两部分:context-param和DispatcherServlet中的init-param。那么,这两部分的配置有什么区别呢?它们都担任什么样的职责呢?

 

  在Spring MVC中,Spring Context是以父子的继承结构存在的。Web环境中存在一个ROOT Context,这个Context是整个应用的根上下文,是其他context的双亲Context。同时Spring MVC也对应的持有一个独立的Context,它是ROOT Context的子上下文。

 

  对于这样的Context结构在Spring MVC中是如何实现的呢?下面就先从ROOT Context入手,ROOT Context是在ContextLoaderListener中配置的,ContextLoaderListener读取context-param中的contextConfigLocation指定的配置文件,创建ROOT Context。

 

Spring MVC启动过程大致分为两个过程:

  1. ContextLoaderListener初始化,实例化IoC容器,并将此容器实例注册到ServletContext中;

  2. DispatcherServlet初始化;

二.Web容器中Spring根上下文的加载与初始化

   Web容器调用contextInitialized方法初始化ContextLoaderListener,在此方法中,ContextLoaderListener通过调用继承自ContextLoader的initWebApplicationContext方法实例化Spring Ioc容器。

 

  先看一下WebApplicationContext是如何扩展ApplicationContext来添加对Web环境的支持的。WebApplicationContext接口定义如下:
 

public interface WebApplicationContext extends ApplicationContext {
     //根上下文在ServletContext中的名称
     String ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE = WebApplicationContext.class.getName() + ".ROOT";
     //取得web容器的ServletContext
     ServletContext getServletContext();
 }

下面看一下ContextLoaderListener中创建context的源码:ContextLoader.java
public WebApplicationContext initWebApplicationContext(ServletContext servletContext) {
     //PS : ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE=WebApplicationContext.class.getName() + ".ROOT" 根上下文的名称
     //PS : 默认情况下,配置文件的位置和名称是: DEFAULT_CONFIG_LOCATION = "/WEB-INF/applicationContext.xml" 
     //在整个web应用中,只能有一个根上下文
     if (servletContext.getAttribute(WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE) != null) {
         throw new IllegalStateException("Cannot initialize context because there is already a root application context present - " + "check whether you have multiple ContextLoader* definitions in your web.xml!");
     }
 
     Log logger = LogFactory.getLog(ContextLoader.class);
     servletContext.log("Initializing Spring root WebApplicationContext");
     if (logger.isInfoEnabled()) {
         logger.info("Root WebApplicationContext: initialization started");
     }
     long startTime = System.currentTimeMillis();
 
     try {
         // Store context in local instance variable, to guarantee that
         // it is available on ServletContext shutdown.
         if (this.context == null) {
             // 在这里执行了创建WebApplicationContext的操作
             this.context = createWebApplicationContext(servletContext);
         }
         if (this.context instanceof ConfigurableWebApplicationContext) {
             ConfigurableWebApplicationContext cwac = (ConfigurableWebApplicationContext) this.context;
             if (!cwac.isActive()) {
                 // The context has not yet been refreshed -> provide services such as
                 // setting the parent context, setting the application context id, etc
                 if (cwac.getParent() == null) {
                     // The context instance was injected without an explicit parent ->
                     // determine parent for root web application context, if any.
                     ApplicationContext parent = loadParentContext(servletContext);
                     cwac.setParent(parent);
                 }
                 configureAndRefreshWebApplicationContext(cwac, servletContext);
             }
         }
         // PS: 将根上下文放置在servletContext中
         servletContext.setAttribute(WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE, this.context);
 
         ClassLoader ccl = Thread.currentThread().getContextClassLoader();
         if (ccl == ContextLoader.class.getClassLoader()) {
             currentContext = this.context;
         } else if (ccl != null) {
             currentContextPerThread.put(ccl, this.context);
         }
 
         if (logger.isDebugEnabled()) {
             logger.debug("Published root WebApplicationContext as ServletContext attribute with name [" +
WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE + "]");
         }
         if (logger.isInfoEnabled()) {
             long elapsedTime = System.currentTimeMillis() - startTime;
             logger.info("Root WebApplicationContext: initialization completed in " + elapsedTime + " ms");
         }
 
         return this.context;
     } catch (RuntimeException ex) {
         logger.error("Context initialization failed", ex);
         servletContext.setAttribute(WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE, ex);
         throw ex;
     } catch (Error err) {
         logger.error("Context initialization failed", err);
         servletContext.setAttribute(WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE, err);
         throw err;
     }
 }
再看一下WebApplicationContext对象是如何创建的:ContextLoader.java
protected WebApplicationContext createWebApplicationContext(ServletContext sc, ApplicationContext parent) {
    //根据web.xml中的配置决定使用何种WebApplicationContext。默认情况下使用XmlWebApplicationContext
    //web.xml中相关的配置context-param的名称“contextClass”
    Class<?> contextClass = determineContextClass(sc);
    if (!ConfigurableWebApplicationContext.class.isAssignableFrom(contextClass)) {
        throw new ApplicationContextException("Custom context class [" + contextClass.getName() + "] is not of type [" + ConfigurableWebApplicationContext.class.getName() + "]");
    }
 
    //实例化WebApplicationContext的实现类
    ConfigurableWebApplicationContext wac = (ConfigurableWebApplicationContext) BeanUtils.instantiateClass(contextClass);
 
    // Assign the best possible id value.
    if (sc.getMajorVersion() == 2 && sc.getMinorVersion() < 5) {
    // Servlet <= 2.4: resort to name specified in web.xml, if any.
        String servletContextName = sc.getServletContextName();
        if (servletContextName != null) {
            wac.setId(ConfigurableWebApplicationContext.APPLICATION_CONTEXT_ID_PREFIX + servletContextName);
        } else {
    wac.setId(ConfigurableWebApplicationContext.APPLICATION_CONTEXT_ID_PREFIX);
        }
    } else {
        // Servlet 2.5's getContextPath available!
        wac.setId(ConfigurableWebApplicationContext.APPLICATION_CONTEXT_ID_PREFIX + sc.getContextPath());
    }
 
    wac.setParent(parent);
 
    wac.setServletContext(sc);
    //设置spring的配置文件
    wac.setConfigLocation(sc.getInitParameter(CONFIG_LOCATION_PARAM));
    customizeContext(sc, wac);
    //spring容器初始化
    wac.refresh();
    return wac;
}
ContextLoaderListener构建Root Context时序图:
Spring Context

三.Spring MVC对应的上下文加载与初始化

Spring MVC中核心的类是DispatcherServlet,在这个类中完成Spring context的加载与创建,并且能够根据Spring Context的内容将请求分发给各个Controller类。DispatcherServlet继承自HttpServlet,关于Spring Context的配置文件加载和创建是在init()方法中进行的,主要的调用顺序是init-->initServletBean-->initWebApplicationContext。

先来看一下initWebApplicationContext的实现:FrameworkServlet.java
 

protected WebApplicationContext initWebApplicationContext() {
    //先从web容器的ServletContext中查找WebApplicationContext
    WebApplicationContext wac = findWebApplicationContext();
    if (wac == null) {
        // No fixed context defined for this servlet - create a local one.
        //从ServletContext中取得根上下文
        WebApplicationContext parent = WebApplicationContextUtils.getWebApplicationContext(getServletContext());
        //创建Spring MVC的上下文,并将根上下文作为起双亲上下文
        wac = createWebApplicationContext(parent);
    }
 
    if (!this.refreshEventReceived) {
        // Apparently not a ConfigurableApplicationContext with refresh support:
        // triggering initial onRefresh manually here.
        onRefresh(wac);
    }
 
    if (this.publishContext) {
        // Publish the context as a servlet context attribute.
        // 取得context在ServletContext中的名称
        String attrName = getServletContextAttributeName();
        //将Spring MVC的Context放置到ServletContext中
        getServletContext().setAttribute(attrName, wac);
        if (this.logger.isDebugEnabled()) {
            this.logger.debug("Published WebApplicationContext of servlet '" + getServletName() + "' as ServletContext attribute with name [" + attrName + "]");
        }
    }
        return wac;
}
    通过initWebApplicationContext方法的调用,创建了DispatcherServlet对应的context,并将其放置到ServletContext中,这样就完成了在web容器中构建Spring IoC容器的过程。

    DispatcherServlet创建context时序图:
Spring框架

DispatcherServlet初始化的大体流程:
DispatcherServlet初始化的大体流程:
控制器DispatcherServlet的类图及继承关系:
333
 

四.Spring中DispacherServlet、WebApplicationContext、ServletContext的关系

要想很好理解这三个上下文的关系,需要先熟悉Spring是怎样在web容器中启动起来的。Spring的启动过程其实就是其IOC容器的启动过程,对于web程序,IOC容器启动过程即是建立上下文的过程。

 

Spring的启动过程:

  1. 首先,对于一个web应用,其部署在web容器中,web容器提供其一个全局的上下文环境,这个上下文就是ServletContext,其为后面的spring IoC容器提供宿主环境;

  2. 其次,在web.xml中会提供有contextLoaderListener。在web容器启动时,会触发容器初始化事件,此时contextLoaderListener会监听到这个事件,其contextInitialized方法会被调用,在这个方法中,spring会初始化一个启动上下文,这个上下文被称为根上下文,即WebApplicationContext,这是一个接口类,确切的说,其实际的实现类是XmlWebApplicationContext。这个就是spring的IoC容器,其对应的Bean定义的配置由web.xml中的context-param标签指定。在这个IoC容器初始化完毕后,spring以WebApplicationContext.ROOTWEBAPPLICATIONCONTEXTATTRIBUTE为属性Key,将其存储到ServletContext中,便于获取; 

  3. 再次,contextLoaderListener监听器初始化完毕后,开始初始化web.xml中配置的Servlet,这个servlet可以配置多个,以最常见的DispatcherServlet为例,这个servlet实际上是一个标准的前端控制器,用以转发、匹配、处理每个servlet请求。DispatcherServlet上下文在初始化的时候会建立自己的IoC上下文,用以持有spring mvc相关的bean。在建立DispatcherServlet自己的IoC上下文时,会利用WebApplicationContext.ROOTWEBAPPLICATIONCONTEXTATTRIBUTE先从ServletContext中获取之前的根上下文(即WebApplicationContext)作为自己上下文的parent上下文。有了这个parent上下文之后,再初始化自己持有的上下文。这个DispatcherServlet初始化自己上下文的工作在其initStrategies方法中可以看到,大概的工作就是初始化处理器映射、视图解析等。这个servlet自己持有的上下文默认实现类也是mlWebApplicationContext。初始化完毕后,spring以与servlet的名字相关(此处不是简单的以servlet名为Key,而是通过一些转换,具体可自行查看源码)的属性为属性Key,也将其存到ServletContext中,以便后续使用。这样每个servlet就持有自己的上下文,即拥有自己独立的bean空间,同时各个servlet共享相同的bean,即根上下文(第2步中初始化的上下文)定义的那些bean。

     

在Web容器(比如Tomcat)中配置Spring时,你可能已经司空见惯于web.xml文件中的以下配置代码:
 

<context-param>
       <param-name>contextConfigLocation</param-name>
       <param-value>/WEB-INF/applicationContext.xml</param-value>
   </context-param>
 
   <listener>
       <listener-class>
           org.springframework.web.context.ContextLoaderListener
       </listener-class>
   </listener>
 
   <servlet>
       <servlet-name>mvc-dispatcher</servlet-name>
       <servlet-class>
           org.springframework.web.servlet.DispatcherServlet
       </servlet-class>
       <load-on-startup>1</load-on-startup>
   </servlet>
 
   <servlet-mapping>
       <servlet-name>mvc-dispatcher</servlet-name>
       <url-pattern>/</url-pattern>
   </servlet-mapping></span>
以上配置首先会在ContextLoaderListener中通过<context-param>中的applicationContext.xml创建一个ApplicationContext,再将这个ApplicationContext塞到ServletContext里面,通过ServletContext的setAttribute方法达到此目的,在ContextLoaderListener的源代码中,我们可以看到这样的代码:
servletContext.setAttribute(WebApplicationContext.ROOT_WEB_APPLICATION_CONTEXT_ATTRIBUTE, this.context);
以上由ContextLoaderListener创建的ApplicationContext是共享于整个Web应用程序的,而你可能早已经知道,DispatcherServlet会维持一个自己的ApplicationContext,默认会读取/WEB-INFO/<dispatcherServletName>-servlet.xml文件,而也可以重新配置:
<servlet>  
        <servlet-name>  
           customConfiguredDispacherServlet  
        </servlet-name>  
        <servlet-class>  
            org.springframework.web.servlet.DispatcherServlet  
        </servlet-class>  
        <init-param>  
            <param-name>  
                contextConfigLocation  
            </param-name>  
            <param-value>  
                /WEB-INF/dispacherServletContext.xml  
            </param-value>  
        </init-param>  
        <load-on-startup>1</load-on-startup>  
    </servlet>

问题是:以上两个ApplicationContext的关系是什么,它们的作用作用范围分别是什么,它们的用途分别是什么?

  ContextLoaderListener中创建ApplicationContext主要用于整个Web应用程序需要共享的一些组件,比如DAO,数据库的ConnectionFactory等。而由DispatcherServlet创建的ApplicationContext主要用于和该Servlet相关的一些组件,比如Controller、ViewResovler等。

  对于作用范围而言,在DispatcherServlet中可以引用由ContextLoaderListener所创建的ApplicationContext,而反过来不行。

在Spring的具体实现上,这两个ApplicationContext都是通过ServletContext的setAttribute方法放到ServletContext中的。但是,ContextLoaderListener会先于DispatcherServlet创建ApplicationContext,DispatcherServlet在创建ApplicationContext时会先找到由ContextLoaderListener所创建的ApplicationContext,再将后者的ApplicationContext作为参数传给DispatcherServlet的ApplicationContext的setParent()方法,在Spring源代码中,你可以在FrameServlet.java中找到如下代码:
 

wac.setParent(parent);

其中,wac即为由DisptcherServlet创建的ApplicationContext,而parent则为有ContextLoaderListener创建的ApplicationContext。此后,框架又会调用ServletContext的setAttribute()方法将wac加入到ServletContext中。

  当Spring在执行ApplicationContext的getBean时,如果在自己context中找不到对应的bean,则会在父ApplicationContext中去找。这也解释了为什么我们可以在DispatcherServlet中获取到由ContextLoaderListener对应的ApplicationContext中的bean。

地址:https://www.leftso.com/article/307.html

相关阅读

Spring框架Spring IoC容器的核心原理,前三篇已经从历史的角度和大家一起探讨了为什么会有Spring,Spring的两个核心概念:IoC和AOP的雏形,Spring的历史变迁和如今的...
java编程中spring框架5.0介绍说明/概述,spring5,spring框架,java编程
Spring框架中,可以在6个内置的Scope中创建bean,也可以定义自定义范围。 在这六个范围中,只有在使用Web感知的ApplicationContext时才有四个范围可用。singlet...
Spring Context 与Spring MVC Context那些坑
Java编程中spring boot项目如何获取spring容器applicationContext
Spring框架每个版本的特性及历史介绍,从Spring框架开始1.0到最新的Spring 5.0进行讲解整个Spring生涯中的演变过程以及spring框架生态的扩展。
spring mvc aop对controller切面编程无效解决,在初步使用Spring MVC框架中使用切面的时候可能会遇到AOP对controller层切面无效。这其实是spring容器的...
Spring框架中注解@PostConastruct 和 @PreDestroy来实现Bean初始化和销毁时候执行方法
Java编程中发邮件也是常用的。但是原生的jdk自带的发送邮件用起来还是比较麻烦的。spring框架在Java语言中完全是神一样的存在,通过spring框架的邮件工具来发送邮件就非常方便了,本文...
Spring WebFlux,spring框架5.0将会新增的web增强框架,这里主要讲述什么是Spring WebFlux以及Spring WebFlux的新功能,Spring WebFlux...